Introduction
The G4 Pleated Panel Pre-Filter from GCC Tech is designed for primary air filtration in HVAC systems, cleanroom air handling units (AHUs), and industrial ventilation equipment. It features pleated synthetic non-woven filter media, a metal support mesh, and an aluminum alloy frame.
With a specified size of 592 × 490 × 46 mm, this panel filter is intended to capture larger airborne particles, such as dust and lint, before air reaches downstream filtration stages. It can help reduce particulate loading on medium-efficiency filters and HEPA filters in appropriately designed multistage air filtration systems.
For HVAC contractors, cleanroom engineering companies, equipment manufacturers, and filter distributors, this G4 pleated panel pre-filter provides a primary filtration option for compatible air handling equipment. Customization can be discussed according to project requirements.
Key Features of the G4 Pleated Panel Pre-Filter
1. G4 Primary Filtration
Designed for preliminary air filtration, the G4 pleated panel pre-filter helps capture larger airborne particles before they enter subsequent filtration stages. Its role is to support the overall filtration system rather than replace higher-efficiency filters where these are required.
2. Pleated Synthetic Non-Woven Filter Media
The synthetic non-woven filter media is arranged in pleats to provide an increased media surface area within the panel structure. This design supports particle capture while allowing air to pass through the filter. Actual filtration performance depends on the media specification and operating conditions.
3. Metal Support Mesh
The metal support mesh helps maintain the shape and stability of the pleated filter media during operation. It supports the filter structure and helps limit deformation under suitable operating conditions.
4. Aluminum Alloy Frame
The aluminum alloy frame provides structural support and facilitates installation in compatible filter housings and air handling units. Buyers should confirm the frame dimensions and mounting arrangement before ordering replacement filters.
5. Downstream Filter Protection
When installed upstream of medium-efficiency or HEPA filters, the G4 pre-filter helps capture larger particles before they reach downstream filtration stages. This can help reduce dust loading on subsequent filters, depending on the operating environment and overall system design.
6. Convenient Inspection and Replacement
The panel configuration supports routine inspection and replacement in compatible HVAC and ventilation systems. Filter condition should be monitored according to the equipment manufacturer's maintenance recommendations and the system's operating requirements.
Technical Specifications
|
Item
|
Specification
|
|
Product Name
|
G4 Pleated Panel Pre-Filter
|
|
Filter Efficiency Class
|
G4
|
|
Dimensions
|
592 × 490 × 46 mm
|
|
Filter Media
|
Synthetic Non-Woven Filter Media
|
|
Filter Structure
|
Pleated Panel
|
|
Support Structure
|
Metal Support Mesh
|
|
Frame Material
|
Aluminum Alloy
|
|
Primary Application
|
Air Pre-Filtration
|
|
Customization
|
Available upon request
|
Technical note: Rated airflow, initial pressure drop, recommended final pressure drop, filtration test data, and operating temperature range have not been specified in the available product information. Please confirm these values with GCC Tech before final equipment selection.
Applications of G4 Pleated Panel Pre-Filters
Commercial and Industrial HVAC Systems
The G4 pleated panel pre-filter can be used for primary air filtration in compatible commercial and industrial heating, ventilation, and air-conditioning systems. It helps capture larger airborne particles before the air reaches downstream filtration equipment.
Cleanroom Air Handling Units
In cleanroom ventilation systems, the G4 pre-filter can serve as an upstream filtration stage in a multistage air filtration arrangement. The complete filtration configuration should be selected according to the required cleanliness level, airflow design, process requirements, and downstream filter specifications.
Pharmaceutical Manufacturing Facilities
Pharmaceutical facilities may use primary filters as part of their air handling systems to reduce larger airborne particles entering downstream filtration stages. The selected filtration arrangement must be appropriate for the facility's process requirements and validated system design. A G4 pre-filter does not replace any higher-efficiency filtration required by the application.
Laboratories and Hospitals
Laboratory and hospital ventilation systems may use primary air filters to reduce larger particles entering air handling equipment. Filter selection should be based on the ventilation design and the requirements of the specific area.
Industrial Air Handling Equipment
Factories and industrial facilities can use G4 panel pre-filters in compatible air handling units and ventilation systems. By capturing larger particles upstream, the filter helps reduce dust loading on downstream filtration components.
For systems that combine air filtration with terminal air supply equipment, you can also explore our Fan Filter Units (FFU).
How to Select the Right G4 Panel Pre-Filter
Before ordering a G4 pleated panel pre-filter, buyers should check the following points:
-
Dimensions: Confirm that 592 × 490 × 46 mm matches the filter housing and installation requirements.
-
Filtration class: Verify that G4 is suitable for the intended primary filtration stage.
-
Airflow and pressure drop: Confirm the required airflow and acceptable pressure drop with the supplier.
-
Filter construction: Check the filter media, support mesh, frame material, and mounting configuration.
-
Quantity and customization: Provide the required dimensions, order quantity, and any project-specific requirements.
For replacement projects, OEM applications, or bulk procurement, supplying the existing filter specifications and operating conditions can help GCC Tech assess compatibility and prepare a more accurate quotation.
Frequently Asked Questions
What is a G4 pleated panel pre-filter used for?
A G4 pleated panel pre-filter is used for primary air filtration in compatible HVAC and air handling systems. It helps capture larger airborne particles before they reach downstream filters.
Can a G4 pre-filter be used in a cleanroom?
Yes. It can be used as a preliminary filtration stage in a suitably designed cleanroom air handling system. The complete filtration arrangement must meet the project's cleanliness and process requirements.
What are the dimensions of this G4 panel filter?
The specified dimensions are 592 × 490 × 46 mm. Confirm the housing dimensions and mounting configuration before ordering.
Does a G4 pre-filter replace a HEPA filter?
No. A G4 pre-filter and a HEPA filter serve different filtration purposes. The G4 filter is intended for preliminary particle removal, while HEPA filtration is used where higher-efficiency particle removal is required by the system design.
Can GCC Tech provide customized filter dimensions?
Customization is available for discussion upon request. Buyers should provide the required dimensions, application, quantity, and operating specifications for confirmation.
Request a Quote for G4 Pleated Panel Pre-Filters
Looking for a G4 pleated panel pre-filter for an HVAC system, cleanroom air handling unit, or industrial ventilation project?
Contact GCC Tech with your required dimensions, order quantity, application, and technical specifications. Our team can review your requirements and discuss the available configuration, pricing, and delivery arrangements.
Contact GCC Tech:
ข้อความของคุณจะต้องอยู่ระหว่าง 20-3,000 ตัวอักษร!
english
Русский
português
日本語
한국
العربية
ไทย